Skip to content
Florida Coating Pros — Commercial Roof Coating Specialists, Jacksonville FL
Elevated residential deck in Neptune Beach, Florida during waterproof coating installation

Case study · Neptune Beach, FL

Neptune Beach Residential Deck

A coastal elevated deck in Neptune Beach, waterproofed and recoated — the residential side of the same fluid-applied waterproofing we install on commercial roofs.

Last updated

Coastal decks and water

An elevated residential deck in Neptune Beach, Florida was stripped back and waterproofed with a fluid-applied coating system built for direct coastal exposure.

An elevated deck a few streets from the Atlantic takes salt air, wind-driven rain and constant UV. Where a deck sits over living space, the waterproofing layer is doing the same job a roof does, and it fails in the same places — at the perimeter, at penetrations, and anywhere water is allowed to sit.

The work follows the same sequence as a commercial roof restoration: strip and prepare the substrate, detail the edges and penetrations, then build up a continuous waterproof membrane across the field.

Note on this write-up

TODO(client): the original page carried project specifics we could not retrieve — the deck area, the exact system specified and the finish selected. Send those over and this section becomes a proper case study rather than an outline.

Neptune Beach deck substrate prepared and underlayment laid before the waterproof coating
Waterproof coating work in progress on the Neptune Beach residential deck

Do this yourself

3 steps to evaluate a roof coating

Whether or not you hire us, this is the process that protects you on a coating project.

  1. 1

    Get a professional evaluation

    Have the roof's current condition properly assessed — surface, seams, penetrations, drainage and the insulation below. Some manufacturers, Gaco included, will send a technical team for a free roof evaluation report. A coating over wet insulation traps the problem instead of solving it.

  2. 2

    Confirm the products are UL or FM approved

    Ask for the product data sheet, not a brochure. GacoFlex S4200 carries industry-leading fire performance in approvals, and those approvals are what an insurer and a plans examiner will want to see.

  3. 3

    Use a manufacturer-licensed contractor

    Coating warranties are only valid when the system is installed by a trained applicator licensed through the manufacturer's network, to the specified thickness. Verify the license before you sign anything.

Similar building?

Get your roof assessed

Most commercial roofs with a sound deck can be restored rather than replaced. A free inspection tells you which side of that line yours falls on.

Request a Free Roof Evaluation

Tell us about your building and we'll schedule an on-site inspection and written proposal — no cost, no obligation.

Photos of the roof, a leak or a problem detail help us scope the job before we visit. You can attach several, up to about 8 MB in total.

Licensed & insured · License CCC1327130 · 10, 15 and 20-year leak-free labor and material warranties available on qualifying roofs.

Facing a replacement quote you can't fund?

Restoration is often 50–70% less. A free inspection tells you whether your roof qualifies.

Request a Free Inspection